No products in the cart.
Battery 3.7V 18650 Lithium Rechargeable – (5000mAh) with JST Connector Jack and Wires 1 piece
Battery 3.7V 18650 Lithium Rechargeable – (5000mAh) with JST Connector Jack and Wires 1 piece
EGP160.00
Breakout Board For ESP8266-12E Serial WiFi
Breakout Board For ESP8266-12E Serial WiFi
EGP20.00Adapter 24V 1A with Dual Jack High Quality
Adapter Fixed (24Vdc,1A)
EGP150.00Adapter 24V 2A with Dual Jack High Quality
Adapter Fixed (24Vdc,2A)
EGP180.00Mantis Gripper Kit (10Kg Hold – Mg995 motor)
Mantis Gripper Kit (10Kg Hold – Mg995 motor)
EGP500.00N35 Neodymium Disc Magnet 12x2mm
N35 Neodymium Disc Magnet 12x2mm
EGP20.00N35 Neodymium Disc Magnet 12x2mm
EGP20.00N35 Neodymium Disc Magnet (10x2mm)
N35 Neodymium Disc Magnet (10x2mm)
EGP16.00N35 Neodymium Disc Magnet (10x2mm)
EGP16.00N35 Neodymium Disc Magnet 6x2mm
N35 Neodymium Disc Magnet 6x2mm
EGP8.00N35 Neodymium Disc Magnet 6x2mm
EGP8.00Aluminum coupler 5*6.35mm blue
Aluminum coupler 5*6.35mm blue
EGP60.00Aluminum coupler 5*6.35mm blue
EGP60.00- EGP395.00
EGP500.00Power Supply SMPS S-50-5 (5V,15A)
EGP395.00EGP500.00 ESP32CAM-Shield Micro USB
- The ESP32-CAM AI-Thinker MB programmer Shield is a shield that you attach to your ESP32-CAM board GPIOs.The programmer comes with the FT232-s16 USB to serial chip. This allows you to program the ESP32-CAM using the USB port on the shield. The shield also comes with a RESET button. This may be useful to easily reset the ESP32-CAM or put it into flashing mode.
Note: The camera module is not included with the board.
EGP100.00ESP32CAM-Shield Micro USB
EGP100.00
